Centrifugal blowers

The Elektror product range of standard radial blowers includes plug fans and ATEX fans.

Centrifugal fans for your applications

Centrifugal fans are used if applications need higher pressure with the same or higher airflow than axial fans. A centrifugal blower draws in the air through the inlet axially (in parallel) to the drive axle, deflects the airflow 90 degrees through the rotation of the impellers and extracts it radially.

The airflow is extracted in a specific direction with blowers with a spiral housing. A centrifugal fan without a housing extracts the air radially out of the impeller with curved blades. Centrifugal blowers cover the widest performance range of Elektror industrial fans and blowers with a maximum of 9.500 m³/h and 20.800 Pa.

Appropriate to the subject

Centrifugal fans made of aluminum

These product groups (ND, RD, HRD und HRD FUK) that have been proven and tested for decades are characterised by a robust and durable housing made from aluminium. Thanks to the wide performance range, it offers a very wide scope of applications. There is a wide range of accessories available in order to equip the blowers according to individual requirements.

Radial blowers with stainless steel housing

As the name suggests, the installation and operation conditions represent high demands, this product range (S-LP, S-MP und S-HP) sets an example. The laser welded stainless steel housing made from 1.4301 are particularly resistant against many different chemicals and other aggressive substances. It can also be applied in such areas where corrosion protection is required and there are even technical solutions for high media temperatures.

Aluminum high pressure blowers

Entirely new and recently developed – the aluminium high-pressure series A-HP by Elektror. The team of developers set out to create an even higher-performance series offering impressive efficiency and a compact design. The impeller and housing were optimised and perfectly harmonised based on flow simulations and load tests. The series has a direct drive and is operated by means of a frequency inverter.

High Efficiency blowers

A good energy performance requires the efficient use of energy. Elektror offers this S-HE series for a resources-conserving operation of the system. High efficiency blowers are characterised by the accurate operating point and efficiency-optimised dimensioning. Besides the series, the design of the housing made from sheet steel also offers a good possibility for being adapted to customer-specific adaptations.

High-speed blowers

With a series of high-speed blowers, Elektror offers devices that combine the enormously high power density with an extremely compact design. Speeds up to 12,000 rpm are achieved by using frequency converters. A high bearing life and an extremely impeller stability characterise these devices. Naturally, these blowers can also be equipped with effective acoustic insulation solutions.

Centrifugal fans in use

Customised solution for granulate dryers

Use of our fans and side channel blowers in granulate dryers from Koch.

learn more

Filling of hall layouts

Use of centrifugal fans for the quick and cost-effective filling of hall systems from Arcus.

learn more

Fans for drinking water purification

Use of our centrifugal fans for water purification at Aquadosil.

learn more

Vacuum using centrifugal fans

Use of our products in the machines for producing tubes, sleeves and cans.

learn more

Our centrifugal fans

Centrifugal fans

Aluminium

Low pressure ND max. 100,0 m³/min max. 2.200 Pa
Medium pressure RD max. 142,0 m³/min max. 10.600 Pa
High pressure, frequency converter HRD-FU/FUK max. 100,0 m³/min max. 17.300 Pa
High pressure, belt HRD-Riemen max. 100,0 m³/min max. 17.300 Pa
High pressure, frequency converter A-HP-FU/FUK max. 75,0 m³/min max. 12.090 Pa
Low pressure ND-ATEX max. 95,0 m³/min max. 2.200 Pa
Medium pressure RD-ATEX max. 90,0 m³/min max. 6.800 Pa
High pressure, frequency converter HRD-FU-ATEX max. 100,0 m³/min max. 17.300 Pa

Centrifugal fans

Stainless steel / steel

Low pressure S-LP max. 115,0 m³/min max. 3.050 Pa
Medium pressure S-MP max. 180,0 m³/min max. 10.000 Pa
High pressure, frequency converter S-HP-FU/FUK max. 64,0 m³/min max. 15.250 Pa
Extreme high pressure, frequency converter S-XP-FU/FUK max. 37,0 m³/min max. 16.950 Pa
High efficiency S-HE max. 300,0 m³/min max. 4.800 Pa

About our fans

Downloads

Looking for operating instructions, catalogues or dimensional drawings? You will find all the downloads here.

to the downloads

A peak into production

Take a peak at our Waghäusel production location and learn more about the manufacture of our fans and side channel blowers.

learn more

Elektror on LinkedIn

Get the latest company news and exciting insights into projects on our LinkedIn account.

Elektror on LinkedIn